CMS modules by everest poker.

MATERIAL SAFETY DATA SHEET

ASWIN11

 

DATE OF PRINTED : 14/07/2014

 

 

SECTION 1 : CHEMICAL PRODUCT AND COMPANY INFORMATION

 PRODUCT NAME : ASWIN 11

 PRODUCT USE :     For killing termite, weevil, ants and cockroaches in houses and buildings.

 DIRECTIONS FOR USE :

 For killing termite, weevil ants cockroaches, and small crawling insects : Remove people and all kinds of pet prior from the room, then close the doors and windows. Always wear rubber gloves and mask while

 using. Shake well before use. Spray the product to under cabinets, on doors, windows, chasms, and other hiding places. Or spray directly onto those crawling insects for better result.

 For killing termite, weevil ants and cockroaches other in hiding and fracture place : Spray the product with red tube to use directly deep hiding places.

 For using in kitchen and Food Industry :Cover or wrap up all food, remove plates, containers from the kitchen or the production area. Do not spray during production and always clean the area after using the product.

 

SECTION 2 : COMPOSITION /INFORMATION ON INGREDIENTS

 Bifenthrin   0.034%w/w, Cypermethrin   0.101%w/w , LPG   60.00% w/w

 

SECTION 3 : HAZARD IDENTIFICATION

 Primary Route of Exposure

 Skin and eye contact and inhalation of vapor are the principal routes of exposure to this product

 Inhalation Acute Exposure

 Inhalation of vapor may irritate the respiratory tract.

 Skin contact ? Acute

 Skin contact may cause irritation.

 Mild skin irritate

 Eye contact ? Acute

 Eye contact may cause moderate irritation.

 Mild eye irritate.

 Ingestion ? Acute

 This Product has a low order of toxicity. No signification toxic effects are expected.

 

SECTION 4 : FIRST AID MEASURES

 Inhalation First Aid

 If inhaled , remove victim to fresh air. If not breathing , give artificial respiration.

 Skin Contact First Aid

 Remove contaminated clothing and equipment . Wash all affected areas with plenty of soap and water for at least 15 minutes .

 Eye contact First aid

 Immediately flush eyes with large quantities of running water for a minutes of 15 minutes. If the victim is wearing contact lens, remove them. Hold the eyelids apart during the flushing to ensure rinsing of the entry surface of the eye and lids with water.

 Ingestion First aid

 Call a physician or a poison control center immediately. If victim is conscious and alert, give plenty of

 water to drink . Induce vomiting if directed by medical personal . Never give anything by mouth to an

 unconscious or convulsing person.

 

SECTION 5 : FIRE FIGHTING MEASURES

 Flash point : Not Application

 Auto ignition temperature : Not Application

 Extinguishing Media

 Use water spray , dry chemical , carbon dioxide ,or foam extinguishing agent. Direct application of high pressure water streams may scatter burning material. Fire fighting Procedures

 

SECTION 6 : ACIDENTAL RELEASE MEASURES

 Cleanup

 Small and large spill should be absorbed with a suitable , non-combustible , inert material. Remove the absorbed material, and place in an appropriate chemical waste container for disposal. Flush the spill area with detergent and water.

 

SECTION 7 : HANDLING AND STORAGE

 Handling : Keep in tightly containers.

 Storage : All containers should be storage in a cool , dry , well ?ventilated area. Flame and ignite to fire.

 Maximum storage temperature : Not Over 50?C

 

SECTION 8 : EXPOSURE CONTROLS/PERSONAL PROTECTIVE

 Respiratory Protection : Wear protective mask before using.

 Skin Protection : Wear rubber grove before using

 Eye Protection : Wear safety goggles before using.

 Other Protection : Eyes wash and shower emergency

 

SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES

 Appearance : Aerosol

 Color : Characteristic

 Odor : Characteristic

 Density : 0.945-0.965 g/cm3

 

SECTION 10 : STABILITY AND REACTIVITY

 Stability : Stable under recommended storage and handling condition.

 Hazardous decomposition product : No typical hazardous decomposition products known.

 

SECTION 11 : TOXICOLOGICAL INFORMATION

 LD50(Oral rat) more than 2000 mg/kg

 

SECTION 12 : ECOLOGICAL INFORMATION

 Not Application

 

SECTION 13 : DISPOSAL CONSIDERATIONS

 Disposal methods : Recommendation , dispose of in accordance with local authority requirements.

 

SECTION 14 : TRANSPORT INFORMATIOM

 Not Application

 

SECTION 15 : REGULATORY INFORMATION

 Not Application

 

SECTION 16 : OTHERS INFORMATION

 Not Application


>>DOWNLOAD

logo-msdn

Material Safety Data Sheet  Product : ASWIN BIG RAT
Issue Date : 10/10/2012


1.PRODUCT DATA AND COMPANY IDENTIFICATION
   Name : ASWIN BIG RAT
   Chemical : Rubber Oil
   Using : Trap a rat.
   Company name : ASWINSUPERMAN LTD., PART.
   15 soi24 Phaholyothin Road,Jatujark,Bangkok(10900)
   Tel : 0-2513-3258
2. COMPOSITION INFORMATION ON INGREDIENT
   Mineral water , Bubber oil , Additives
3. HAZARDS INDENTIFICATION
   Nonclassified as HAZARDOUS.
4. FIRST-AID MEASURE
   SKIN : Clean by vegetable oil.
   INGESTION : Unable to swallow because too sticky to swallow.
5.FIRE-FIGHTIN MEASURE
   FLASH POINT : more than 202 c.
   LEL : Nonclassified
   VEL : Nonclassified
   Extinguishing media : spray water jet ,Foam, extinguishing powder, and sand.
6.ACCIDENAL RELEASE MEASURES
   Nonclasified.
7.HANDLING AND STORAGE PRODUCT
   Use plastic or rubber glove to minimize skin contact. Protective grade industrial eye
   Glasses with side shield.
   Avoid storage at high temperature (over 202 degC) in the air.
   Store in a cool well-ventilated place away from incompatible materials. Keep away
   From heat. Avoid to turn upside down and incline it.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to control
   Processing emissions near the source.
   PROTECTIVE CLOTHING: Wear protective gloves to prevent skin contact. Protective grade
   Industrial eye glasses with side shield. If there is potential contact with hot material. Wear
   Heat resistant clothing and footwear.
9. PHYSICAL AND CHEMICAL PROPERITY
   9.1 Physical State : Sticky substance
   9.2 Color : Brown sugar , dark Amber
   9.3 Odor : odorless
   9.4 Melting Point (mp) : 80 c
   9.5 Specific Fravity : 0.98-1.02
   9.6 mPa.s @ 100 c : more than 5,000 mPa.s
10. STABILITY AND REACTIVITY
   Hi-temperature can melt the product to be liquid but the product will reset again when keep it in   normal temperature.
11. TOXICOLOGICAL INFORMATION
   Non toxic : Approved by Thailand of Scientific and Technological Research( PNPD 38/55 : Code    03-05-55)
12. ECOLOGICAL INFORMATION
   No specific data are available.
   Avoid dumping or releasing in oceans or water areas to prevent possible intake by marine organism
   And birds.
13. DISPOSAL CONSIDERATIONS
   Preferred options for disposal are incineration with energy recovery. The disposal practice must be
   In compliance with local state and federal laws and regulations.
14. TRANSPORT INFORMATION
   Follow all regulations in your country.
15. REGULATORY INFORMATION
   Follow all regulations in your country.
16. OTHER INFORMATION
   TO THE BEST OF OUR KNOWLEDGE. THE INFORMATION CONTAINED HEREIN IS ACCURATE,
   HOWEVER. ASWIN SUPERMAN LTD.,PART. DOES NOT ASSUME ANY LIABILITY WHATSOEVER
   FOR THE ACCURACY OR COMPLETENESS OF THE INFORMATION CONTAINED HEREIN. FINAL
   DETERMINATION OF SUITABILITY OF ANY MATERRIAL IS THE SOLE RESPONSIBILITY OF THE
   USER. ALL MATERIAL SHOULD BE USED WITH CAUTION TO GUARD AGAINST UNKNOWN HAZARDS.


>>DOWNLOAD

logo-msdn

Material Safety Data Sheet  Product : ASWIN RAT GLUE
Issue Date : 9/9/2011

 

1.PRODUCT DATA AND COMPANY IDENTIFICATION
   Name : ASWIN RAT GLUE
   Chemical : Rubber Oil
   Company name : ASWINSUPERMAN LTD., PART.
   15 soi24 Phaholyothin Road,Jatujark,Bangkok(10900)
   Tel : 0-2513-3258
2. COMPOSITION INFORMATION ON INGREDIENT
   Ingredient Name : SYNTHETIC RUBBER OIL , POLYISOPRENE , POLYBUTENE
3. HAZARDS INDENTIFICATION
   Notclassified as HAZARDOUS.
4. FIRST-AID MEASURE
   SKIN :Wash with soap and water after wiping off with solvent such as normal paraffin.
   INGESTION : Unable to swallow because too sticky to swallow.
5.FIRE-FIGHTIN MEASURE
   Extinguishing media : spray water jet ,Foam, extinguishing powder, and sand.
6.ACCIDENAL RELEASE MEASURES
   Scoop up in case of a large quantity.
   Mop up with waste immersed normal paraffin or solvent in case of a small quantity.
7.HANDLING AND STORAGE PRODUCT
   Use plastic or rubber glove to minimize skin contact. Protective grade industrial eye
   Glasses with side shield.
   Avoid storage at high temperature (over 100degC) in the air.
   Store in a cool well-ventilated place away from incompatible materials. Keep away
   From heat. Avoid to turn upside down and incline it.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to control
   Processing emissions near the source.
   PROTECTIVE CLOTHING: Wear protective gloves to prevent skin contact. Protective grade
   Industrial eye glasses with side shield. If there is potential contact with hot material. Wear
   Heat resistant clothing and footwear.
9. PHYSICAL AND CHEMICAL PROPERITY
   Physical State : Sticky substance
   Color : Brown sugar , dark Amber
   Odor : odorless
   Melting Point (mp): 80 c
10. STABILITY AND REACTIVITY
   Hi-temperature can melt the product to be liquid but the product will reset again when keep it in    normal temperature.
11. TOXICOLOGICAL INFORMATION
   OTHER TOXICITY: No epecific data are available.
12. ECOLOGICAL INFORMATION
   No specific data are available.
   Avoid dumping or releasing in oceans or water areas to prevent possible intake by marine organism
   And birds.
13. DISPOSAL CONSIDERATIONS
   Preferred options for disposal are incineration with energy recovery. The disposal practice must be
   In compliance with local state and federal laws and regulations.
14. TRANSPORT INFORMATION
   Follow all regulations in your country.
15. REGULATORY INFORMATION
   Follow all regulations in your country.
16. OTHER INFORMATION
   TO THE BEST OF OUR KNOWLEDGE. THE INFORMATION CONTAINED HEREIN IS ACCURATE,
   HOWEVER. ASWIN SUPERMAN LTD.,PART. DOES NOT ASSUME ANY LIABILITY WHATSOEVER
   FOR THE ACCURACY OR COMPLETENESS OF THE INFORMATION CONTAINED HEREIN. FINAL
   DETERMINATION OF SUITABILITY OF ANY MATERRIAL IS THE SOLE RESPONSIBILITY OF THE
   USER. ALL MATERIAL SHOULD BE USED WITH CAUTION TO GUARD AGAINST UNKNOWN HAZARDS.
   ALTHOUGH CERTAIN HAZARDS ARE DESCRIBED HEREIN, WE CANNOT GUARANTEE THAT THESE
   ARE THE ONLY HAZARDS WHICH EXIST.

 

>>DOWNLOAD

logo-msdn

Material Safety Data Sheet  Product : ASWIN RAT GLUE TRAYS
Issue Date : 09/09/2012    

   

1.PRODUCT DATA AND COMPANY IDENTIFICATION
   Name : ASWIN RAT GLUE TRAYS
   Chemical : Rubber Oil
   Using : Trap a rat
   Company name : ASWINSUPERMAN LTD., PART.
   15 soi24 Phaholyothin Road,Jatujark,Bangkok(10900)
   Tel : 0-2513-3258
2. COMPOSITION INFORMATION ON INGREDIENT
   Ingredient Name : SYNTHETIC RUBBER OIL , POLYISOPRENE , POLYBUTENE
3. HAZARDS INDENTIFICATION
   Nonclassified as HAZARDOUS.
4. FIRST-AID MEASURE
   SKIN :Wash with soap and water after wiping off with solvent such as normal paraffin.
   INGESTION : Unable to swallow because too sticky to swallow.
5.FIRE-FIGHTIN MEASURE
   Extinguishing media : spray water jet ,Foam, extinguishing powder, and sand.
6.ACCIDENAL RELEASE MEASURES
   Scoop up in case of a large quantity.
   Mop up with waste immersed normal paraffin or solvent in case of a small quantity.
7.HANDLING AND STORAGE PRODUCT
   Use plastic or rubber glove to minimize skin contact. Protective grade industrial eye
   Glasses with side shield.Avoid storage at high temperature (over 100degC) in the air.
   Store in a cool well-ventilated place away from incompatible materials. Keep away
   From heat. Avoid to turn upside down and incline it.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to control
   Processing emissions near the source.
   PROTECTIVE CLOTHING: Wear protective gloves to prevent skin contact. Protective grade
   Industrial eye glasses with side shield. If there is potential contact with hot material. Wear
   Heat resistant clothing and footwear.
9. PHYSICAL AND CHEMICAL PROPERITY
   Physical State : Sticky substance
   Color : Brown sugar , dark Amber
   Odor : odorless
   Melting Point (mp): 80 c
10. STABILITY AND REACTIVITY
   Hi-temperature can melt the product to be liquid but the product will reset again when keep it in    normal temperature.
11. TOXICOLOGICAL INFORMATION
   Non toxic , Approved by Thailand Institute of Scientific and Technological Research.
   (Report PNPD 10/49 Code 02-11-48)
12. ECOLOGICAL INFORMATION
   No specific data are available.
   Avoid dumping or releasing in oceans or water areas to prevent possible intake by marine
   Organism And birds.
13. DISPOSAL CONSIDERATIONS
   Preferred options for disposal are incineration with energy recovery. The disposal practice must
   Be In compliance with local state and federal laws and regulations.
14. TRANSPORT INFORMATION
   Follow all regulations in your country.
15. REGULATORY INFORMATION
   Follow all regulations in your country.
16. OTHER INFORMATION
   TO THE BEST OF OUR KNOWLEDGE. THE INFORMATION CONTAINED HEREIN IS ACCURATE,
   HOWEVER. ASWIN SUPERMAN LTD.,PART. DOES NOT ASSUME ANY LIABILITY WHATSOEVER
   FOR THE ACCURACY OR COMPLETENESS OF THE INFORMATION CONTAINED HEREIN. FINAL
   DETERMINATION OF SUITABILITY OF ANY MATERRIAL IS THE SOLE RESPONSIBILITY OF THE
   USER. ALL MATERIAL SHOULD BE USED WITH CAUTION TO GUARD AGAINST UNKNOWN HAZARDS.
   ALTHOUGH CERTAIN HAZARDS ARE DESCRIBED HEREIN, WE CANNOT GUARANTEE THAT THESE
   ARE THE ONLY HAZARDS WHICH EXIST.

 

>>DOWNLOAD

logo-msdn

Material Safety Data Sheet    Product : BEST RAT
Issue Date : 9/9/2013

 

1.PRODUCT DATA AND COMPANY IDENTIFICATION
   Name : BEST RAT
  Chemical : Rubber Oil
  Company name : ASWINSUPERMAN LTD., PART.
  15 soi24 Phaholyothin Road,Jatujark,Bangkok(10900)
  Tel : 0-2513-3258
2.COMPOSITION INFORMATION ON INGREDIENT
    Ingredient Name : SYNTHETIC RUBBER OIL , POLYISOPRENE , POLYBUTENE
3.HAZARDS INDENTIFICATION
    Notclassified as HAZARDOUS.
4.FIRST-AID MEASURE
   SKIN :Wash with soap and water after wiping off with solvent such as normal paraffin.
   INGESTION : Unable to swallow because too sticky to swallow.
5.FIRE-FIGHTIN MEASURE
   Extinguishing media : spray water jet ,Foam, extinguishing powder, and sand.
6.ACCIDENAL RELEASE MEASURES
   Scoop up in case of a large quantity.
   Mop up with waste immersed normal paraffin or solvent in case of a small quantity.
7.HANDLING AND STORAGE PRODUCT
   Use plastic or rubber glove to minimize skin contact. Protective grade industrial eye
   Glasses with side shield.
   Avoid storage at high temperature (over 100degC) in the air.
   Store in a cool well-ventilated place away from incompatible materials. Keep away
   From heat. Avoid to turn upside down and incline it.
8.EXPOSURE CONTROLS/PERSONAL PROTECTION
   ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to control
   Processing emissions near the source.
   PROTECTIVE CLOTHING: Wear protective gloves to prevent skin contact. Protective grade
   Industrial eye glasses with side shield. If there is potential contact with hot material. Wear
   Heat resistant clothing and footwear.
9.PHYSICAL AND CHEMICAL PROPERITY
   Physical State : Sticky substance
   Color : Brown sugar , dark Amber
   Odor : odorless
   Melting Point (mp): 80 c
10.STABILITY AND REACTIVITY
   Hi-temperature can melt the product to be liquid but the product will reset again when keep it in normal temperature.
11.TOXICOLOGICAL INFORMATION
   OTHER TOXICITY: No epecific data are available.
12. ECOLOGICAL INFORMATION
   No specific data are available.
   Avoid dumping or releasing in oceans or water areas to prevent possible intake by marine organism
And birds.
13. DISPOSAL CONSIDERATIONS
   Preferred options for disposal are incineration with energy recovery. The disposal practice must be
   In compliance with local state and federal laws and regulations.
14. TRANSPORT INFORMATION
   Follow all regulations in your country.
15. REGULATORY INFORMATION
   Follow all regulations in your country.
16. OTHER INFORMATION
   TO THE BEST OF OUR KNOWLEDGE. THE INFORMATION CONTAINED HEREIN IS ACCURATE,
   HOWEVER. ASWIN SUPERMAN LTD.,PART. DOES NOT ASSUME ANY LIABILITY WHATSOEVER
   FOR THE ACCURACY OR COMPLETENESS OF THE INFORMATION CONTAINED HEREIN. FINAL
   DETERMINATION OF SUITABILITY OF ANY MATERRIAL IS THE SOLE RESPONSIBILITY OF THE
   USER. ALL MATERIAL SHOULD BE USED WITH CAUTION TO GUARD AGAINST UNKNOWN HAZARDS.
   ALTHOUGH CERTAIN HAZARDS ARE DESCRIBED HEREIN, WE CANNOT GUARANTEE THAT THESE
   ARE THE ONLY HAZARDS WHICH EXIST.

>>DOWNLOAD

Material Safety Data Sheet

logo-msdn 

Material Safety Data Sheet  Product : STOP RAT
Issue Date : 9/10/2012 


1.PRODUCT DATA AND COMPANY IDENTIFICATION
   Name : STOP RAT
   Chemical : Rubber Oil
   Company name : ASWINSUPERMAN LTD., PART.
   15 soi24 Phaholyothin Road,Jatujark,Bangkok(10900)
   Tel : 0-2513-3258
2. COMPOSITION INFORMATION ON INGREDIENT
   Mineral water , Bubber oil , Additives
3. HAZARDS INDENTIFICATION
   Nonclassified as HAZARDOUS.
4. FIRST-AID MEASURE
   SKIN : Clean by vegetable oil.
   INGESTION : Unable to swallow because too sticky to swallow.
5.FIRE-FIGHTIN MEASURE
   FLASH POINT : more than 202 c.
   LEL : Nonclassified
   VEL : Nonclassified
   Extinguishing media : spray water jet ,Foam, extinguishing powder, and sand.
6.ACCIDENAL RELEASE MEASURES
   Nonclasified.
7.HANDLING AND STORAGE PRODUCT
   Use plastic or rubber glove to minimize skin contact. Protective grade industrial eye
   Glasses with side shield.
   Avoid storage at high temperature (over 202 degC) in the air.
   Store in a cool well-ventilated place away from incompatible materials. Keep away
   From heat. Avoid to turn upside down and incline it.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to control
   Processing emissions near the source.
   PROTECTIVE CLOTHING: Wear protective gloves to prevent skin contact. Protective grade
   Industrial eye glasses with side shield. If there is potential contact with hot material. Wear
   Heat resistant clothing and footwear.
9. PHYSICAL AND CHEMICAL PROPERITY
   9.1 Physical State : Sticky substance
   9.2 Color : Brown sugar , dark Amber
   9.3 Odor : odorless
   9.4 Melting Point (mp) : 80 c
   9.5 Specific Fravity : 0.98-1.02
   9.6 mPa.s @ 100 c : more than 2,000 mPa.s
10. STABILITY AND REACTIVITY
   Hi-temperature can melt the product to be liquid but the product will reset again when keep it in    normal temperature.
11. TOXICOLOGICAL INFORMATION
   OTHER TOXICITY: No epecific data are available.
12. ECOLOGICAL INFORMATION
   No specific data are available.
   Avoid dumping or releasing in oceans or water areas to prevent possible intake by marine organism
   And birds.
13. DISPOSAL CONSIDERATIONS
   Preferred options for disposal are incineration with energy recovery. The disposal practice must be
   In compliance with local state and federal laws and regulations.
14. TRANSPORT INFORMATION
   Follow all regulations in your country.
15. REGULATORY INFORMATION
   Follow all regulations in your country.
16. OTHER INFORMATION
   TO THE BEST OF OUR KNOWLEDGE. THE INFORMATION CONTAINED HEREIN IS ACCURATE,
   HOWEVER. ASWIN SUPERMAN LTD.,PART. DOES NOT ASSUME ANY LIABILITY WHATSOEVER
   FOR THE ACCURACY OR COMPLETENESS OF THE INFORMATION CONTAINED HEREIN. FINAL
   DETERMINATION OF SUITABILITY OF ANY MATERRIAL IS THE SOLE RESPONSIBILITY OF THE
   USER. ALL MATERIAL SHOULD BE USED WITH CAUTION TO GUARD AGAINST UNKNOWN HAZARDS.


>>DOWNLOAD

logo-msdn

Material Safety Data Sheet    Product : X-RAT
Issue Date : 9/9/2011

 

1.PRODUCT DATA AND COMPANY IDENTIFICATION
   Name : X-RAT
   Chemical : Rubber Oil
   Company name : ASWINSUPERMAN LTD., PART.
   15 soi24 Phaholyothin Road,Jatujark,Bangkok(10900)
   Tel : 0-2513-3258
2. COMPOSITION INFORMATION ON INGREDIENT
   Ingredient Name : SYNTHETIC RUBBER OIL , POLYISOPRENE , POLYBUTENE
3. HAZARDS INDENTIFICATION
   Notclassified as HAZARDOUS.
4. FIRST-AID MEASURE
   SKIN :Wash with soap and water after wiping off with solvent such as normal paraffin.
   INGESTION : Unable to swallow because too sticky to swallow.
5.FIRE-FIGHTIN MEASURE
   Extinguishing media : spray water jet ,Foam, extinguishing powder, and sand.
6.ACCIDENAL RELEASE MEASURES
   Scoop up in case of a large quantity.
   Mop up with waste immersed normal paraffin or solvent in case of a small quantity.
7.HANDLING AND STORAGE PRODUCT
   Use plastic or rubber glove to minimize skin contact. Protective grade industrial eye
   Glasses with side shield.
   Avoid storage at high temperature (over 100degC) in the air.
   Store in a cool well-ventilated place away from incompatible materials. Keep away
   From heat. Avoid to turn upside down and incline it.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to control
   Processing emissions near the source.
   PROTECTIVE CLOTHING: Wear protective gloves to prevent skin contact. Protective grade
   Industrial eye glasses with side shield. If there is potential contact with hot material. Wear
   Heat resistant clothing and footwear.
9. PHYSICAL AND CHEMICAL PROPERITY
   Physical State : Sticky substance
   Color : Brown sugar , dark Amber
   Odor : odorless
   Melting Point (mp): 80 c
10. STABILITY AND REACTIVITY
   Hi-temperature can melt the product to be liquid but the product will reset again when keep it in normal temperature.
11. TOXICOLOGICAL INFORMATION
   OTHER TOXICITY: No epecific data are available.
12. ECOLOGICAL INFORMATION
   No specific data are available.
   Avoid dumping or releasing in oceans or water areas to prevent possible intake by marine organism
   And birds.
13. DISPOSAL CONSIDERATIONS
   Preferred options for disposal are incineration with energy recovery. The disposal practice must be
   In compliance with local state and federal laws and regulations.
14. TRANSPORT INFORMATION
   Follow all regulations in your country.
15. REGULATORY INFORMATION
   Follow all regulations in your country.
16. OTHER INFORMATION
   TO THE BEST OF OUR KNOWLEDGE. THE INFORMATION CONTAINED HEREIN IS ACCURATE,
   HOWEVER. ASWIN SUPERMAN LTD.,PART. DOES NOT ASSUME ANY LIABILITY WHATSOEVER
   FOR THE ACCURACY OR COMPLETENESS OF THE INFORMATION CONTAINED HEREIN. FINAL
   DETERMINATION OF SUITABILITY OF ANY MATERRIAL IS THE SOLE RESPONSIBILITY OF THE
   USER. ALL MATERIAL SHOULD BE USED WITH CAUTION TO GUARD AGAINST UNKNOWN HAZARDS.
   ALTHOUGH CERTAIN HAZARDS ARE DESCRIBED HEREIN, WE CANNOT GUARANTEE THAT THESE
   ARE THE ONLY HAZARDS WHICH EXIST.

 

>>DOWNLOAD

Wednesday the 25th. Joomla 2.5 Templates. Copyright © 2014 AswinThailand All right reserved.